Valves and End Caps
Choose locally manufactured front-end components that perfectly fit your needs.
VALVES & END CAPS
The perfect addition
Being the key components to any injection molding setup, valves and end caps are manufactured from steels or alloys that are best suited to the processing environment in which they will be used. Various tool steels that are heat-treated and/or nitrided nickel alloys, chrome plating and special coatings are all options from which to choose.
The sales and engineering team at Reiloy will work with you to determine the best front-end component to fit your needs. Just like Reiloy USA screws and barrels, quality is key. These components are produced in the USA.
TYPES OF VALVES
The Perfect Valves for Your Injection Molding Setup
Non-return valve allow melted resin to flow in front of the screw during plasticating and block the melt from flowing back to the screw during injection. Choose the type that best fit your need.
Free Flow Valve
They can be used when processing most resins and can be custom designed for specific resins.
Locking Valve
Locking valves are designed to lock in a specific position and are commonly standard in many AP or EU manufactured machines.
Ball Check Valve
There are several different types of ball check designs, though the most common are side or front discharge assemblies.
Not sure which type of valves you need?
What are you looking for?
Our portfolio
Valves
The function of the non-return valve is to allow melted resin to flow in front of the screw during plasticating and block the melt from flowing back to the screw during injection.
Standard Option:
comprises of H13/D2 Combination
Premium Option:
comprises of CPM10V/9V Combination
Application Driven Options:
420V, Rex76, M4, CV20 Elmax, Nitride, and Carbide
Standard Option:
comprises of H13/D2 Combination
Premium Option:
comprises of CPM10V/9V Combination
Application Driven Options:
420V, Rex76, M4, CV20 Elmax, Nitride, and Carbide
Front and Side Discharge Options
Standard Version:
D2 Body - Stainless Steel Ball
Premium Version:
CPM10V Body - Stainless Steel Ball
Application Driven Options:
Discussed on a case-by-case basis on Ball Checks
END CAPS
End Caps That Match Your Other Components
The end cap is a necessary part installed on the barrel that keeps plastic contained and helps guide the material into the mold through the die extension.
Base Material Options:
4150, H13, 420V (S90V), Elmax
Treatment Options:
Nitride, Chrome, Ceramic Chrome to name a few
Constructions and Options are based on:
Size, Type and Application
Base Material Options:
4150, H13, 420V (S90V), Elmax
Treatment Options:
Nitride, Chrome, Ceramic Chrome to name a few
Constructions and Options are based on:
Size, Type and Application
